802.11g Compact Flash Card with Integrated Antenna
*The SDC-CF22G has reached end of production and is available on a limited basis only.
The SDC-CF22G card provides all key Summit hardware and software capabilities in a compact flash card (CF) form factor. The result is a Wi-Fi® card with unmatched range, robust security, and easy administration, ideal for use in any mobile device with an external CF slot. The SDC-CF22G card is ideal for use in any business-critical mobile device with an external CF slot.
Please review the below data sheets for complete device specifications.
Download SDC-CF22G Hardware Integration Guide (PDF) (version 1.1, 07/14/2010)
16-bit Compact Flash Type I with 50-pin connector
Note: This card is not designed for operation in the CF slot on standard laptop and desktop PCs. For these devices, Summit suggests using the SDC-PC20G in the PC Card (PCMCIA) or CardBus slot found on most laptops and desktops.
|Antenna Interface||0 dBi Gain Diversity Omnidirectional with Diversity|
|Input Power Requirements||3.3 VDC +/- 10%|
|Typical Power Consumption (at maximum transmit power setting)||
|Operating Temperature||-30° to 85°C (-22° to 185°F)|
|Operating Humidity||10 to 90% (non-condensing)|
|Length||67 mm (2.64")|
|Width||43 mm (1.69")|
|Weight||21g (0.7 oz)|
|Mounting||50 pin connector|
|Media Access Protocol||Carrier sense multiple access with collision avoidance (CSMA/CA)|
|Network Architecture Types||Infrastructure and Ad Hoc|
|Network Standards||802.11b, 802.11d, 802.11g, 802.11i|
|Data Rates Supported||
|Regulatory Domain Support||
|Transmit Power Settings
Maximum transmit power will vary according to individual country regulations. All values nominal, +/-2 dBm
|Typical Receiver Sensitivity||
|Operating Systems Supported||
Note: All ETSI, FCC, IC, and MIC certifications for the SDC-CF10G are applicable to the SDC-CF22G
All specifications are subject to change without notice
From a regulatory and certification perspective, the SDC-CF22G is the SDC-CF10G with an integrated antenna.
Regulatory CertificationsAll ETSI, FCC, Industry Canada, and MIC (formerly TELEC) certifications for the SDC-CF10G are applicable to the SDC-CF22G. Please review the SDC-CF10G certification information page for detailed information on existing certifications and how your organization can leverage them.
In addition, Summit is equally committed to tested and certified compliance with key industry standards from the Wi-Fi Alliance (WFA). Refer to the SDC-CF10G Wi-Fi Interoperability Certificate for more information.
Summit is committed to compliance with the most recent versions of the Cisco Compatible Extensions (CCX). For a list of Summit’s Cisco Compatible Extensions client devices, refer to the following website: http://www.cisco.com/web/partners/pr46/pr147/partners_pgm_partners_0900aecd800a7907.html
Like all Summit devices, the SDC-CF22G is fully compliant with European Union Directive 2011/65/EU or Reduction of Hazardous Substances (RoHS) as per our Declaration of Compliance.
If any additional information or guidance is required, please contact Summit's certification group via email or by telephone at 330.434.7929.