802.11a/g Compact Flash Card with Integrated Antenna
*The SDC-CF22AG has reached end of production and is available on a limited basis only.
The SDC-CF22AG card provides all key Summit hardware and software capabilities in a compact flash card (CF) form factor. This dual-band radio card operates in both the 2.4 and 5 GHz frequency bands, supporting IEEE 802.11a 5 GHz) as well as 802.11b and 802.11g (2.4 GHz). The SDC-CF22AG card is ideal for use in any business-critical mobile device with an external CF slot.
Please review the below data sheets for complete device specifications.
Download SDC-CF22AG Hardware Integration Guide (PDF) (version 1.1, 1/31/13)
|System Interface||16-bit Compact Flash Type II with 50-pin connector|
|Antenna Interface||0-dBi gain dual-band omnidirectional with diversity|
|Input Power Requirements||3.3 VDC +/- 10%|
|Typical Power Consumption (at maximum transmit power setting)||
|Operating Temperature||-30° to 85°C (-22° to 185°F)|
|Operating Humidity||10 to 90% (non-condensing)|
|Length||67 mm (2.64")|
|Width||43 mm (1.69")|
|Thickness||5 mm (0.2")|
|Weight||28g (1.0 oz)|
|Mounting||50-pin connector and standard compact flash rails|
|Media Access Protocol||Carrier sense multiple access with collision avoidance (CSMA/CA)|
|Network Architecture Types||Infrastructure and Ad Hoc|
|Network Standards||IEEE 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i|
|Data Rates Supported||
|Regulatory Domain Support||
|2.4 GHz Frequency Bands||
|5 GHz Frequency Bands||
|2.4 GHz Operating Channels||
|5 GHz Operating Channels||
|Transmit Power Settings
Maximum transmit power will vary according to individual country regulations. All values nominal, +/-2 dBm
|Typical Receiver Sensitivity||
|Operating Systems Supported||
Note: All ETSI, FCC, IC, and MIC certifications for the SDC-CF10AG are applicable to the SDC-CF22AG
All specifications are subject to change without notice
From a regulatory and certification perspective, the SDC-CF22AG is the SDC-CF10AG with an integrated antenna.
All ETSI, FCC, Industry Canada, and MIC (formerly TELEC) certifications for the SDC-CF10AG are applicable to the SDC-CF22AG. Please review the SDC-CF10AG certification information page for detailed information on existing certifications and how your organization can leverage them.
For a list of Summit’'s Cisco Compatible Extensions client devices, refer to the following website: http://www.cisco.com/web/partners/pr46/pr147/partners_pgm_partners_0900aecd800a7907.html
Like all Summit devices, the SDC-CF22AG is fully compliant with European Union Directive 2011/65/EU or Reduction of Hazardous Substances (RoHS) as per our Declaration of Compliance.
If any additional information or guidance is required, please contact Summit's certification group via email or by telephone at 330.434.7929.